bnr-53W53-High-Rise-EN-US
  1. We are WSP
  2. What we do
  3. Projects
  4. 53w53 New York

53w53, New York

53W53, formerly known as the MoMA Tower (or Torre Verre), is not just a super-slender tower but a work of art – as befits a building that will sit above New York’s Museum of Modern Art, and even house 50,000 square feet of additional gallery space in its lower floors.

Location

  • New York, USA

Client

  • Museum of Modern Art; Hines/Goldman Sachs

Architect

  • Ateliers Jean Nouvel; SLCE Architects

Project Status

  • Under Construction

Rising gracefully to a height of 1,050 feet over Midtown, the building tapers at gently shifting inclines. Randomly spaced diagrids roam freely up the façade, to be reflected in the unique geometry of each of the 139 apartments.

Engineering 53W53- Exterior View

But the diagrid structure is not only an aesthetic flourish. The slenderness of the building means that there is no room for superfluous structure: high-strength concrete and reinforcing steel will be used to construct a shear-wall core, but the façade has to play an important supporting role too.

Height
1,050 ft
apartments
139
Additional Gallery Space
50,000 ft

Unique Façade

This presented an interesting challenge for the engineering team, not least because architect Jean Nouvel was also adamant that the building’s complex façade should be a genuine expression of the structure beneath. “Normally we are the ones dictating where the columns go but this was the opposite,” explains Gustavo Oliveira, vice president at WSP in New York. “We couldn’t add diagrids in, we had to mimic what was on the façade, so it was an iterative process with the architect. We had never approached a building that way before.”

Concrete Diagrid Structure

The other unusual feature of 53W53’s diagrid structure is what it is made of. Nouvel’s original design was intended to be built in steel. But the floor-to-floor heights of a steel structure would have limited the number of stories too much, so WSP investigated how to create the same aesthetic in concrete instead – “the first time that a diagrid structure of this magnitude and complexity has been done in concrete,” notes Oliveira.

img-engineering-53w53-exterior-view-tower

Aside from the complex structural gymnastics, the team also spent considerable time evaluating how 53W53 could actually be delivered. Because of its complexity, construction will take more than five years, around double the program for a more conventional design. One of the biggest challenges was designing the nodes where different structural components would join. Reinforcement for perhaps seven or eight elements had to fit into the same node, and then the concrete had to be able to flow freely to enclose it and produce a sound structure. Oliveira’s team worked closely not only with the architect but the construction team, and this included commissioning a mock-up of the rebar. “Rather than just coming up with solutions that looked good on paper, we assessed the constructability of the job too. Although not typically part of the engineer’s role, this is such a unique building, it needed a unique approach.”

Other challenges that we have overcome